Checklist for landing the kite

STEP 1: 

Stand next to the anchor point.

 

STEP 2:

Gently land the kite at the edge of the wind window, away from the power zone, and release the kite bar once it's safely on the ground (picture 1).

 

STEP 3:

Connect the quick disconnect of the safety leash to the D-ring of the LIBERO (picture 2).

 

 

STEP 3:

Attach the carabiner of LIBERO to the chicken loop (picture 3).

 

STEP 4:

Depower the kite and approach it until all the kite's pull is transferred to the LIBERO (picture 4). Check for any movement of your sand anchor if using the combined system SOLISTA and LIBERO before detaching from the chicken loop.

 

STEP 5:

With the sand anchor stable and full tension on the LIBERO, disconnect the chicken loop from your harness (picture 5).

 

 

STEP 6:

Walk upwind towards your kite, grab it, turn it over, move a few meters towards your anchor point, then place it safely on the ground. It's recommended to secure the kite on the ground by adding sand behind the front tube like shown in pictures 6 to 8.